Z4-450-32 (309kw340kw200kw220kw DC Motor

Solution Description:
 
DC motor is a rotating motor that can transform DC electric powered strength into mechanical energy (DC motor) or mechanical vitality into DC electrical strength (DC generator). It is a motor that can convert DC and mechanical vitality into a single an additional. When it operates as a motor, it is a direct existing motor, which converts electrical energy into mechanical vitality when it runs as a generator, it is a direct existing generator, which converts mechanical power into electrical strength.
 

Product Identify Z4-450-32 (309kw340kw200kw220kw DC Motor
Motor Type DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition structure The construction of DC motor must consist of two components: stator and rotor. The static element of DC motor is referred to as stator. The main perform of stator is to produce magnetic subject, which is composed of base, principal magnetic pole, commutation pole, conclude cap, bearing and brush system. Managing part is named rotor, whose principal purpose is to create electromagnetic torque and inductive electromotive power. It is the hub of power conversion of DC motor. So it is also generally called armature, which is made up of rotor, armature core, armature winding, commutator and supporter.
Product Z Kind
Seat amount Z315-Z1000
power 60~2800kW
Voltage 220~1000V
Torque range 1.5 ~180kNm
Security stage IP23, IP44
Cooling mode IC06,IC17,IC37,IC81W
Operating speed  Constant Pace /Low Pace /Adjust Speed /Large Speed Other 
Principal classification DC Motor is a equipment that converts mechanical power into DC electrical power. It is mostly used as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation energy source of alternator. Even though in places the place DC electricity is necessary, AC electricity rectifier is also used to convert AC into DC electrical power, but from some aspects of functionality, AC rectifier energy offer can not entirely replace DC generator.  
Software DC motors are commonly employed in tape recorders, video clip recorders, video clip discs, electrical shavers, hair dryers, electronic watches, toys and so on.
Routine maintenance technique Skilled motor servicing centre motor maintenance process: cleaning stator and rotor – changing carbon brush or other components – vacuum F force dipping paint – drying – Calibration stability.
one. Use atmosphere ought to be constantly dry, motor surface must be held thoroughly clean, air consumption ought to not be hindered by dust, fibers and other road blocks.
2. When the thermal defense of the motor continues to operate, it need to be ascertained regardless of whether the fault comes from the motor or the overload or the setting price of the protective system is also lower. Following eliminating the fault, it can be put into operation.
three, make certain that the motor is well lubricated in the course of operation. The standard motor operates for about 5000 hours, that is to say, lubricating grease need to be added or replaced. When bearing overheating or lubricating deterioration is found in operation, the hydraulic force must alter lubricating grease in time. When changing grease, the outdated grease need to be taken off, and the oil groove of bearing and bearing include must be washed with gasoline. Then ZL-3 lithium grease must be loaded with 1/two (two poles) and two/three (four poles, 6 poles and 8 poles) of the cavity amongst the interior and outer rings of the bearing.
4. When the daily life of the bearing is above, the vibration and sounds of the motor will boost obviously. When the radial clearance of the bearing reaches the adhering to value, the bearing must be changed.
5, when removing the motor, it is Alright to eliminate the rotor from the shaft extension or the non extension conclude. If it is not needed to unload the fan, it is much more convenient to get out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation need to be prevented from getting broken.
6. When changing the windings, the form, measurement, turns and gauges of the original windings need to be recorded. When these knowledge are misplaced, they need to be acquired from the company and the first created windings must be changed at will, which typically deteriorates 1 or several performance of the motor or even tends to make it unattainable to use them.

 

 

Z4-450-32 (309kw340kw200kw220kw DC Motor