Yrks Series High Voltage Three-Phase Asynchronous DC Motor

Solution Description:
 
DC motor is a rotating motor that can change DC electrical strength into mechanical energy (DC motor) or mechanical strength into DC electric vitality (DC generator). It is a motor that can change DC and mechanical energy into 1 one more. When it runs as a motor, it is a direct present motor, which converts electrical power into mechanical power when it runs as a generator, it is a immediate present generator, which converts mechanical energy into electrical power.
 

Item Name YRKS Sequence Substantial Voltage 3-section Asynchronous DC Motor
Motor Variety DC Motor,ACMotor,Stepper Motor,Asynchronous Motor ,Synchronous Motor
(CZPT equipment)
Composition construction The composition of DC motor need to consist of two parts: stator and rotor. The static component of DC motor is referred to as stator. The primary purpose of stator is to generate magnetic discipline, which is composed of base, main magnetic pole, commutation pole, stop cap, bearing and brush device. Running component is called rotor, whose main operate is to create electromagnetic torque and inductive electromotive pressure. It is the hub of energy conversion of DC motor. So it is also typically named armature, which consists of rotor, armature main, armature winding, commutator and enthusiast.
Product Z Kind
Seat amount Z315-Z1000
electrical power sixty~2800kW
Voltage 220~1000V
Torque range 1.5 ~180kNm
Defense degree IP23, IP44
Cooling mode IC06,IC17,IC37,IC81W
Operating pace  Constant Velocity /Lower Speed /Adjust Velocity /High Speed Other 
Major classification DC Motor is a machine that converts mechanical vitality into DC energy. It is mainly utilised as DC motor for DC motor, electrolysis, electroplating, smelting, charging and excitation electrical power offer of alternator. Despite the fact that in spots exactly where DC energy is necessary, AC power rectifier is also utilised to transform AC into DC energy, but from some elements of overall performance, AC rectifier power source can not completely substitute DC generator.  
Application DC motors are extensively employed in tape recorders, video recorders, video discs, electric shavers, hair dryers, electronic watches, toys and so on.
Routine maintenance strategy Skilled motor upkeep center motor routine maintenance approach: cleaning stator and rotor – replacing carbon brush or other components – vacuum F force dipping paint – drying – Calibration equilibrium.
one. Use setting must be often dry, motor floor should be stored clear, air ingestion need to not be hindered by dust, fibers and other obstructions.
2. When the thermal safety of the motor proceeds to work, it need to be ascertained whether the fault will come from the motor or the overload or the setting worth of the protecting unit is also lower. Soon after eliminating the fault, it can be place into operation.
3, ensure that the motor is well lubricated for the duration of operation. The basic motor operates for about 5000 hrs, that is to say, lubricating grease must be included or replaced. When bearing overheating or lubricating deterioration is identified in procedure, the hydraulic strain need to modify lubricating grease in time. When replacing grease, the outdated grease must be taken out, and the oil groove of bearing and bearing cover should be washed with gasoline. Then ZL-3 lithium grease should be filled with one/two (two poles) and two/3 (four poles, six poles and 8 poles) of the cavity in between the inner and outer rings of the bearing.
4. When the daily life of the bearing is above, the vibration and noise of the motor will enhance clearly. When the radial clearance of the bearing reaches the adhering to price, the bearing need to be replaced.
five, when taking away the motor, it is Alright to remove the rotor from the shaft extension or the non extension stop. If it is not required to unload the enthusiast, it is much more convenient to take out the rotor from the non-axle extension finish. When pulling out the rotor from the stator, the stator winding or insulation ought to be prevented from becoming destroyed.
6. When replacing the windings, the sort, dimension, turns and gauges of the unique windings need to be recorded. When these info are dropped, they should be obtained from the maker and the unique designed windings should be transformed at will, which often deteriorates 1 or many efficiency of the motor or even helps make it unattainable to use them.

 

 

Yrks Series High Voltage Three-Phase Asynchronous DC Motor