Product Description

12/24V High Torque electric DC Motor 

1. Stator size is optional
2. Safe, reliable, low noise, good starting, long life
3. Strong power
Rated voltage 12-24vol/50Hz

Typical used: 
 motor is widely used in home appliances as Microwave turing plate, Quartz heater, Dishwasher, Can opener, Knife sharpener, washing machine

 

MODEL VOLT POWER FREE SPEED FREE CURRENT
D49R 24V 30W 180±5RPM <0.65A
D76R 12V 70W 80±8RPM <0.65A
D63R 12V 70W 65±6RPM <0.65A

 

D49Series                  
                   
Typical Market                  
Products for industry and commerce uses motor                
Application                  
Household appliances motor  Office supplies motor  Electric tools motor  Industrial equipment motor  Food process motor    
Main Technical Parameters                  
Vol: 12/24/48V DC                  
Rated Speed:10-300RPM                
Rated Input Power: 10-600W                
Insulation Class: A B F H                
                   
                   
Motor characteristic                  
Products code Voltage(V) Power(W) No load Load Gear Ratio Motor length(mm)
      Speed(RPM) Current(A) Speed(RPM) Current(A) Torque(N.M)    
D49L/R-2425-180 24 25 180±5 ≤0.8 150±5 ≤3.0 ≤3.5 1:28 71
D49L/R-2425-150 24 25 150±5 ≤0.8 130±5 ≤3.0 ≤3.5 1:28 71
D49L/R-2415-90 24 15 90±5 ≤0.8 80±5 ≤3.0 ≤5.0 1:28 56
D49L/R-2410-65 24 15 65±3 ≤0.8 60±3 ≤3.0 ≤5.0 1:56 56
D49L/R-1220-70 12 20 70±3 ≤1.2 65±3 ≤3.5 ≤6.0 1:56 71
D49L/R-1220-65 12 20 65±3 ≤1.2 55±3 ≤3.5 ≤6.0 1:56 71
D49L/R-4815-35 48 15 35±3 ≤1.2 30±3 ≤4.0 ≤7.0 1:56 56
D49L/R-4215-35 42 15 35±3 ≤1.2 30±3 ≤4.0 ≤7.0 1:56 56
D49L/R-2410-15 24 10 15±3 ≤1.2 10±3 ≤4.0 ≤6.5 1:56 56
D49L/R-1210-15 12 10 15±3 ≤1.2 10±3 ≤4.0 ≤6.5 1:56 56
Notice The parameters of the motors above are for your reference, we can design and manufacture according to your 
required like voltage,power,speed,torque and dimensions        
Voltage:≤48VDC    Power:≤60W    Output Speed:≤180RPM        
Speed sensor: hall sensor, encoder, opto sensor          
Application: welding machine,electrical household,diamond machiney,office intelligent enquipment,hotel leisure,
automated and so on. There are many kinds of gear ratio for your demand    
                   
                   
Motor characteristic                  
Products code Voltage(V) Power(W) No load Load Gear Ratio Motor length(mm)
      Speed(RPM) Current(A) Speed(RPM) Current(A) Torque(N.M)    
D59L/R-1230-15 12 30 15±5 ≤1.2 12±2 ≤4.5 ≥4.0 1:70 80
D59L/R-2430-15 24 30 15±5 ≤1.2 12±2 ≤4.5 ≥4.0 1:70 80
D59L/R-2450-36 24 30 36±5 ≤1.2 32±2 ≤6.5 ≥8.0 1:70 80
D59L/R-1230-65 12 30 65±3 ≤1.2 60±3 ≤5.5 ≥6.0 1:56 80
D59L/R-2430-65 24 30 65±3 ≤1.2 60±3 ≤5.5 ≥6.0 1:56 80
D59L/R-4830-65 48 30 65±3 ≤1.2 60±3 ≤5.5 ≥6.0 1:56 80
D59L/R-4230-130 42 30 130±5 ≤1.5 100±5 ≤6.5 ≥4.0 1:28 80
D59L/R-2430-150 24 30 150±5 ≤1.0 130±5 ≤6.5 ≥4.0 1:28 80
D59L/R-2430-180 24 30 180±5 ≤1.2 150±5 ≤6.5 ≥4.0 1:28 80
D59L/R-2430-210 24 30 210±5 ≤1.5 180±5 ≤6.5 ≥4.2 1:28 80
Notice The parameters of the motors above are for your reference, we can design and manufacture according to your 
required like voltage,power,speed,torque and dimensions        
Voltage:≤48VDC    Power:≤60W    Output Speed:≤180RPM        
Speed sensor: hall sensor, encoder, opto sensor          
Application: welding machine,electrical household,diamond machiney,office intelligent enquipment,hotel leisure,
automated and so on. There are many kinds of gear ratio for your demand    
                   
                   
Motor characteristic                  
Products code Voltage(V) Power(W) No load Load Gear Ratio Motor length(mm)
      Speed(RPM) Current(A) Speed(RPM) Current(A) Torque(N.M)    
D63L/R-1230-130 24 30 130±5 ≤1.0 110±5 ≤3.5 ≥3.3 1:20 ≤60
D63L/R-1230-150 24 30 150±5 ≤1.2 130±5 ≤4.5 ≥4.5 1:20 ≤60
D63L/R-2430-180 24 30 180±5 ≤1.5 150±5 ≤6.5 ≥6.0 1:20 ≤60
D63L/R-2445-150 24 45 150±5 ≤1. 130±5 ≤3.5 ≥3.3 1:20 ≤60
D63L/R-4245-180 24 45 180±5 ≤1.2 150±5 ≤4.5 ≥4.5 1:20 ≤60
D63L/R-4245-210 24 45 210±5 ≤1.5 180±5 ≤6.5 ≥6.0 1:20 ≤60
D63L/R-4868-150 24 65 150±5 ≤1.0 130±5 ≤3.5 ≥3.3 1:20 ≤60
D63L/R-2465-180 24 65 180±5 ≤1.2 150±5 ≤4.5 ≥4.5 1:20 ≤60
D63L/R-2465-210 24 65 210±5 ≤1.5 180±5 ≤6.5 ≥6.0 1:20 ≤60
D63L/R-2480-75 24 80 75±3 ≤1.2 70±5 ≤4.5 ≥5.0 1:60 ≤60
D63L/R-2480-65 24 80 65±3 ≤1.2 60±5 ≤4.5 ≥5.0 1:60 ≤60
D63L/R-1280-75 12 80 75±3 ≤1.2 65±5 ≤6.5 ≥4.0 1:60 ≤60
D63L/R-1280-65 12 80 65±3 ≤1.2 55±5 ≤6.5 ≥4.0 1:60 ≤60
D63L/R-1280-45 12 80 45±3 ≤1.2 40±5 ≤6.5 ≥4.0 1:75 ≤60
D59L/R-24100-35 24 100 35±3 ≤1.2 30±5 ≤6.5 ≥4.0 1:75 ≤60
Notice The parameters of the motors above are for your reference, we can design and manufacture according to your 
required like voltage,power,speed,torque and dimensions        
Voltage:≤48VDC    Power:≤80W    Output Speed:≤220RPM        
Speed sensor: hall sensor, encoder, opto sensor          
Application: welding machine,electrical household,diamond machiney,office intelligent enquipment,hotel leisure,
automated and so on. There are many kinds of gear ratio for your demand    
                   
Motor characteristic                  
Products code Voltage(V) Power(W) No load Load Gear Ratio Motor length(mm)
      Speed(RPM) Current(A) Speed(RPM) Current(A) Torque(N.M)    
D76L/R-2460-30 24 60 30±3 ≤1.2 26±3 ≤3.5 ≥4.5 1:75 77
D76L/R-4260-30 42 60 30±3 ≤1.2 26±3 ≤3.5 ≥5.0 1:75 77
D76L/R-2460-50 24 60 50±3 ≤1.2 45±3 ≤3.5 ≥4.5 1:60 77
D76L/R-4260-65 42 60 65±3 ≤1.2 60±3 ≤3.5 ≥5.0 1:60 77
D76L/R-4860-75 48 60 75±3 ≤1.2 70±3 ≤3.5 ≥5.2 1:60 77
D76L/R-1280-50 12 80 50±3 ≤1.4 42±3 ≤4.5 ≥5.0 1:60 85
D76L/R-2480-65 24 80 65±3 ≤1.4 62±3 ≤4.5 ≥5.2 1:60 85
D76L/R-1245-150 12 45 150±5 ≤1.0 130±5 ≤3.5 ≥3.3 1:20 77
D76L/R-2445-180 24 45 180±5 ≤1.2 150±5 ≤4.5 ≥4.5 1:20 77
D76L/R-4845-220 48 45 220±3 ≤1.5 180±5 ≤6.5 ≥6.0 1:20 77
D76L/R-2465-200 24 65 200±3 ≤1.2 160±5 ≤4.5 ≥4.5 1:20 85
D76L/R-2465-220 24 65 220±3 ≤1.5 180±5 ≤6.5 ≥6.0 1:20 85
D76L/R-2495-180 24 95 180±5 ≤1.2 150±5 ≤4.5 ≥4.5 1:20 97
D76L/R-2495-220 24 95 220±3 ≤1.5 180±5 ≤6.5 ≥6.0 1:20 97
Notice The parameters of the motors above are for your reference, we can design and manufacture according to your 
required like voltage,power,speed,torque and dimensions        
Voltage:≤48VDC    Power:≤150W    Output Speed:≤260RPM      
Speed sensor: hall sensor, encoder, opto sensor          
Application: welding machine,electrical household,diamond machiney,office intelligent enquipment,hotel leisure,
automated and so on. There are many kinds of gear ratio for your demand    
                   

ABOUT US

Greatupmotor  group was set up in 2006.we always focus on micro-motors for household electrical appliance and industry appliance since setting up.currently we have 2 professional micro-motor factories in China  which severally located in HangZhou city and HangZhou city.it has an area of 25,000 square CHINAMFG plants and more than 300 employees, annual output  is 3 million pcs and has 5 million pcs annual producing capacity.after several years development,we had built a great reputation in the market and got more and more customers’  trust in the world.
We  started from shaded pole motors  at beginning, up to now,our product  included of shaded pole motors,synchronous motors,stepping motors ,capacitor motors, BLDC motors, DC motors and compressors. Our product  are widely used for making refrigerators, freezers, micro-wave ovens, air warmers, air exhausters, ventilators,ovens, air filter, massage machines and many other equipments.
As a realiable quality guaranty,Ritscher has complete R&D departement,QC department,producing department,purchase department etc. has perfect producing equipment like Aluminum diecasting, Zinc diecasting, Sheet metal stamping, Plastic injection molding etc. also test/ detection device like multiplex temp measuring device, performance parameter inspection device, Phenol peptide solution pinhole tester,Anechoic room etc.
 
Endeavoring to provide the best product and service to customers,we always do the most effort to become an outstanding manufacturer of micro motors.
Ritscher is always willing to establish sincere business relationship with friends from all over the world.
Welcome contact with us!
 
Take Greatupmotor  ,enjoy modern life!

Our company FAQ for you

(1) Q: What kind motors you can provide?
A:For now,we mainly provide Kitchen Hood Motor,DC Motor,Gear Motor,Fan Motor Refrigerator Motor,Hair Dryer Motor Blender Motor Mixer Motor,
Shade Pole Motor,Capacitor Motor,BLDC Motor PMDC Motor,Synchronous Motor,Stepping Motor etc.

(2) Q: Is it possible to visit your factory
A: Sure. But please kindly keep us posted a few days in advance. We need to check our
schedule to see if we are available then.

(3) Q: Can I get some samples
A: It depends. If only a few samples for personal use or replacement, I am afraid it will
be difficult for us to provide, because all of our motors are custom made and no stock
available if there is no further needs. If just sample testing before the official order and
our MOQ, price and other terms are acceptable, we’d love to provide samples.

(4) Q: Is there a MOQ for your motors?
A: Yes. The MOQ is between 1000~10,000pcs for different models after sample approval.
But it’s also okay for us to accept smaller lots like a few dozens, hundreds or thousands
For the initial 3 orders after sample approval.For samples, there is no MOQ requirement. But the less the better (like no more than 5pcs) on condition that the quantity is enough in case any changes needed after initial testing.

  /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

Application: Automation Equipment, Audio and Video Equipment, Moving Machinery
Operating Speed: Adjust Speed
Power Source: DC Motor
Function: Control, Driving
Casing Protection: Protection Type
Number of Poles: 2
Samples:
US$ 1/Piece
1 Piece(Min.Order)

|

Customization:
Available

|

brake motor

What advancements in brake motor technology have improved energy efficiency?

Advancements in brake motor technology have led to significant improvements in energy efficiency, resulting in reduced power consumption and operational costs. These advancements encompass various aspects of brake motor design, construction, and control systems. Here’s a detailed explanation of the advancements in brake motor technology that have improved energy efficiency:

  • High-Efficiency Motor Designs: Brake motors now incorporate high-efficiency motor designs that minimize energy losses during operation. These designs often involve the use of advanced materials, improved winding techniques, and optimized magnetic circuits. High-efficiency motors reduce the amount of energy wasted as heat and maximize the conversion of electrical energy into mechanical power, leading to improved overall energy efficiency.
  • Efficient Brake Systems: Brake systems in modern brake motors are designed to minimize energy consumption during braking and holding periods. Energy-efficient brake systems utilize materials with low friction coefficients, reducing the energy dissipated as heat during braking. Additionally, advanced control mechanisms and algorithms optimize the engagement and disengagement of the brake, minimizing power consumption while maintaining reliable braking performance.
  • Regenerative Braking: Some advanced brake motors incorporate regenerative braking technology, which allows the recovery and reuse of energy that would otherwise be dissipated as heat during braking. Regenerative braking systems convert the kinetic energy of the moving equipment into electrical energy, which is fed back into the power supply or stored in energy storage devices. By harnessing and reusing this energy, brake motors improve energy efficiency and reduce the overall power consumption of the system.
  • Variable Speed Control: Brake motors equipped with variable frequency drives (VFDs) or other speed control mechanisms offer improved energy efficiency. By adjusting the motor’s speed and torque to match the specific requirements of the application, variable speed control reduces energy wastage associated with operating at fixed speeds. The ability to match the motor’s output to the load demand allows for precise control and significant energy savings.
  • Advanced Control Systems: Brake motors benefit from advanced control systems that optimize energy usage. These control systems employ sophisticated algorithms and feedback mechanisms to continuously monitor and adjust motor performance based on the load conditions. By dynamically adapting the motor operation to the changing requirements, these control systems minimize energy losses and improve overall energy efficiency.
  • Improved Thermal Management: Efficient thermal management techniques have been developed to enhance brake motor performance and energy efficiency. These techniques involve the use of improved cooling systems, such as advanced fan designs or liquid cooling methods, to maintain optimal operating temperatures. By effectively dissipating heat generated during motor operation, thermal management systems reduce energy losses associated with excessive heat and improve overall energy efficiency.

These advancements in brake motor technology, including high-efficiency motor designs, efficient brake systems, regenerative braking, variable speed control, advanced control systems, and improved thermal management, have collectively contributed to improved energy efficiency. By reducing energy losses, optimizing braking mechanisms, and implementing intelligent control strategies, modern brake motors offer significant energy savings and contribute to a more sustainable and cost-effective operation of equipment.

brake motor

How does a brake motor enhance safety in industrial and manufacturing settings?

In industrial and manufacturing settings, brake motors play a crucial role in enhancing safety by providing reliable braking and control mechanisms. These motors are specifically designed to address safety concerns and mitigate potential risks associated with rotating machinery and equipment. Here’s a detailed explanation of how brake motors enhance safety in industrial and manufacturing settings:

1. Controlled Stopping: Brake motors offer controlled stopping capabilities, allowing for precise and predictable deceleration of rotating machinery. This controlled stopping helps prevent abrupt stops or sudden changes in motion, reducing the risk of accidents, equipment damage, and injury to personnel. By providing smooth and controlled stopping, brake motors enhance safety during machine shutdowns, emergency stops, or power loss situations.

2. Emergency Stop Functionality: Brake motors often incorporate emergency stop functionality as a safety feature. In case of an emergency or hazardous situation, operators can activate the emergency stop function to immediately halt the motor and associated machinery. This rapid and reliable stopping capability helps prevent accidents, injuries, and damage to equipment, providing an essential safety measure in industrial environments.

3. Load Holding Capability: Brake motors have the ability to hold loads in position when the motor is not actively rotating. This load holding capability is particularly important for applications where the load needs to be securely held in place, such as vertical lifting mechanisms or inclined conveyors. By preventing unintended movement or drift of the load, brake motors ensure safe operation and minimize the risk of uncontrolled motion that could lead to accidents or damage.

4. Overload Protection: Brake motors often incorporate overload protection mechanisms to safeguard against excessive loads. These protection features can include thermal overload protection, current limiters, or torque limiters. By detecting and responding to overload conditions, brake motors help prevent motor overheating, component failure, and potential hazards caused by overburdened machinery. This protection enhances the safety of personnel and prevents damage to equipment.

5. Failsafe Braking: Brake motors are designed with failsafe braking systems that ensure reliable braking even in the event of power loss or motor failure. These systems can use spring-loaded brakes or electromagnetic brakes that engage automatically when power is cut off or when a fault is detected. Failsafe braking prevents uncontrolled motion and maintains the position of rotating machinery, reducing the risk of accidents, injury, or damage during power interruptions or motor failures.

6. Integration with Safety Systems: Brake motors can be integrated into safety systems and control architectures to enhance overall safety in industrial settings. They can be connected to safety relays, programmable logic controllers (PLCs), or safety-rated drives to enable advanced safety functionalities such as safe torque off (STO) or safe braking control. This integration ensures that the brake motor operates in compliance with safety standards and facilitates coordinated safety measures across the machinery or production line.

7. Compliance with Safety Standards: Brake motors are designed and manufactured in compliance with industry-specific safety standards and regulations. These standards, such as ISO standards or Machinery Directive requirements, define the safety criteria and performance expectations for rotating machinery. By using brake motors that meet these safety standards, industrial and manufacturing settings can ensure a higher level of safety, regulatory compliance, and risk mitigation.

8. Operator Safety: Brake motors also contribute to operator safety by reducing the risk of unintended movement or hazardous conditions. The controlled stopping and load holding capabilities of brake motors minimize the likelihood of unexpected machine behavior that could endanger operators. Additionally, the incorporation of safety features like emergency stop buttons or remote control options provides operators with convenient means to stop or control the machinery from a safe distance, reducing their exposure to potential hazards.

By providing controlled stopping, emergency stop functionality, load holding capability, overload protection, failsafe braking, integration with safety systems, compliance with safety standards, and operator safety enhancements, brake motors significantly enhance safety in industrial and manufacturing settings. These motors play a critical role in preventing accidents, injuries, and equipment damage, contributing to a safer working environment and ensuring the well-being of personnel.

brake motor

What industries and applications commonly use brake motors?

Brake motors find wide-ranging applications across various industries that require controlled stopping, load holding, and precise positioning. Here’s a detailed overview of the industries and applications commonly using brake motors:

1. Material Handling: Brake motors are extensively used in material handling equipment such as cranes, hoists, winches, and conveyors. These applications require precise control over the movement of heavy loads, and brake motors provide efficient stopping and holding capabilities, ensuring safe and controlled material handling operations.

2. Elevators and Lifts: The vertical movement of elevators and lifts demands reliable braking systems to hold the load in position during power outages or when not actively driving the movement. Brake motors are employed in elevator systems to ensure passenger safety and prevent unintended movement or freefall of the elevator car.

3. Machine Tools: Brake motors are used in machine tools such as lathes, milling machines, drilling machines, and grinders. These applications often require precise positioning and rapid stopping of rotating spindles or cutting tools. Brake motors provide the necessary control and safety measures for efficient machining operations.

4. Conveyor Systems: Conveyor systems in industries like manufacturing, logistics, and warehouses utilize brake motors to achieve accurate control over the movement of goods. Brake motors enable smooth acceleration, controlled deceleration, and precise stopping of conveyor belts, ensuring proper material flow and minimizing the risk of collisions or product damage.

5. Crushers and Crushers: In industries such as mining, construction, and aggregates, brake motors are commonly used in crushers and crushers. These machines require rapid and controlled stopping to prevent damage caused by excessive vibration or unbalanced loads. Brake motors provide the necessary braking force to halt the rotation of crusher components quickly.

6. Robotics and Automation: Brake motors play a vital role in robotics and automation systems that require precise movement control and positioning. They are employed in robotic arms, automated assembly lines, and pick-and-place systems to achieve accurate and repeatable movements, ensuring seamless operation and high productivity.

7. Printing and Packaging: Brake motors are utilized in printing presses, packaging machines, and labeling equipment. These applications require precise control over the positioning of materials, accurate registration, and consistent stopping during printing or packaging processes. Brake motors ensure reliable performance and enhance the quality of printed and packaged products.

8. Textile Machinery: Brake motors are commonly found in textile machinery such as spinning machines, looms, and textile printing equipment. These applications demand precise control over yarn tension, fabric movement, and position holding. Brake motors offer the necessary braking force and control for smooth textile manufacturing processes.

9. Food Processing: Brake motors are employed in food processing equipment, including mixers, slicers, extruders, and dough handling machines. These applications require precise control over mixing, slicing, and shaping processes, as well as controlled stopping to ensure operator safety and prevent product wastage.

These are just a few examples, and brake motors are utilized in numerous other industries and applications where controlled stopping, load holding, and precise positioning are essential. The versatility and reliability of brake motors make them a preferred choice in various industrial sectors, contributing to enhanced safety, productivity, and operational control.

China OEM PMDC Electric Permanent Magnet DC Motor for Power Tool/Electric Tool   vacuum pump oil near me		China OEM PMDC Electric Permanent Magnet DC Motor for Power Tool/Electric Tool   vacuum pump oil near me
editor by CX 2024-03-29