Merchandise Description

 

Solution Description

Planetary Gear Stepping Motor :
Precision high-end upgrade with Nema8, Nema 11, Nema14, Nema 17, Nema23, Nema 24 
stepper motor low noise, low vibration, firm and durable. Increase torque at low speed.
Reduction ratio:1:3.7 , 1:5.2 , 1:14 , 1:19 ,1:27 ,1:51 , 1:71 ,1:100 ,1:139 , 1:189 ,1:264 , 1:369 ,And 48 hours delivery , in stock .

Software:
Automation control, medical equipment, textile machinery,and packaging machinery fields. Not only in the field of the automation industry, it also has a good use status in the home.   Products with low speed and inertia are often seen: electric curtains, electric shutters, etc
 

Merchandise Parameters

Planetary Gear Box Specification:

Housing Materials Steel
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 200N
Max.Shaft Axial Load 100N
Radial Play of Shaft (close to to Flange) ≤0.06mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load one stage≤1°,2stage≤1.2°,3stage≤1.5°

42HS Hybrid Stepping Motor Requirements:
 

Model No. Step Angle Motor Length(L1) Rated Existing Resistance Inductance Holding Torque # of Qualified prospects Rotor Inertia Mass Max.Equipment Ratio
Voltage /Phase /Stage /Period
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 one.8 34 two.ninety three one.33 2.2 three.5 270 four thirty .22 ≤1:369
42HSC4409 one.eight 40 2.five one.5 one.sixty five 3.three 380 four forty .3 ≤1:369

 

42HSC1409 Planetary Gearbox Technical specs:
Reduction ratio three.71 5.eighteen 14 19 27 51 seventy one a hundred 139 189 264 369
Whole Peak(L1+L2) (mm) sixty five.5 sixty five.five 76.one 76.one 76.one 86.five 86.5 86.5 86.five 96.9 ninety six.9 96.9
Output torque ( mN.m) 902 1259 3062 4155 5000 10000 10000 10000 ten thousand ten thousand ten thousand ten thousand
Total Fat(g) 428 428 510 510 510 592 592 592 592 674 674 674
Variety of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.five 42.one 52.five 62.nine
Effectiveness 90% 81% 73% 66%

 

42HSC4409 Planetary Gearbox Specs:
Reduction ratio three.seventy one five.eighteen fourteen 19 27 fifty one seventy one one hundred 139 189 264 369
Complete Peak(L1+L2) (mm) 71.5 seventy one.five 82.one eighty two.1 eighty two.one ninety two.5 92.five ninety two.five 92.five 102.nine 102.9 102.nine
Output torque ( mN.m) 1269 1772 4309 5000 5000 ten thousand 10000 ten thousand ten thousand ten thousand ten thousand 10000
Complete Weight(g) 508 508 590 590 590 672 672 672 672 754 754 754
Amount of gear trains 1 2 3 4
Reducer Duration(L2)   (mm) 31.5 42.1 52.5 62.9
Performance 90% 81% 73% 66%

 

Comprehensive Pictures

 

Parameters of Drawing

Company Profile

ZheJiang UMot Technologies Co., Ltd. specializes in R&D and product sales of stepper motors, servo motors, linear modules and associated motion control goods, customizing and designing substantial-top quality motor products for users with particular demands close to the planet, and delivering overall answers for movement control programs. Products are exported to a lot more than thirty countries and regions which includes the United States, Germany, France, Italy, Russia, and Switzerland. The company’s principal goods and system style have been commonly utilized in automation control, precision instruments, healthcare products, wise property, 3D printing and many other fields.
Our business has been recognized as a large-tech enterprise by relevant departments, has a full high quality administration system, has attained ISO9001, CE, RoHs and other associated certifications, and holds a number of electrical patent certificates. “Focus, Professionalism, Concentration” in the field of automation of motor R&D and method handle answers is the company’s enterprise goal. “Be your most dependable spouse” is the company’s service philosophy. We have often been aiming to “make 1st-class merchandise with expert technologies”, hold pace with the instances, innovate consistently, and supply much more end users with much better products and services.

FAQ

one. Delivery strategy:
1)International Specific shipping DHL&FEDEX &UPS&TNT& 7-10days
two)Shipping and delivery by air 7-10 days
3)shipping and delivery by sea, shipping and delivery time relies upon on the spot port.

two. Complex Assistance:
We can supply you with skilled technical support. And our items good quality assure is 6 months. Also, we accept goods tailored.

3. Why must you buy from us, not from other suppliers?
Professional one-to-1 motor custom-made. The world’s huge enterprise of selection for higher-top quality suppliers. ISO9001:2008 quality administration program certification, via the CE, ROHS certification.

four. How to decide on designs?
Just before acquiring, make sure you get in touch with us to affirm product No. and specifications to stay away from any misunderstanding.

5. Are you a factory?
Indeed, we are a factory, and we produce stepper motor/driver, Servo motor/driver.

 

Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 200N
Max.Shaft Axial Load 100N
Radial Play of Shaft (near to Flange) 0.06mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 1.8 34 2.93 1.33 2.2 3.5 270 4 30 0.22 1:369
42HSC4409 1.8 40 2.5 1.5 1.65 3.3 380 4 40 0.3 1:369

###

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 65.5 65.5 76.1 76.1 76.1 86.5 86.5 86.5 86.5 96.9 96.9 96.9
Output torque ( mN.m) 902 1259 3062 4155 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 428 428 510 510 510 592 592 592 592 674 674 674
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

###

42HSC4409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 71.5 71.5 82.1 82.1 82.1 92.5 92.5 92.5 92.5 102.9 102.9 102.9
Output torque ( mN.m) 1269 1772 4309 5000 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 508 508 590 590 590 672 672 672 672 754 754 754
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%
Application: Automation Control, Medical Equipment, Textile Mac
Speed: Low Speed
Number of Stator: Two-Phase
Excitation Mode: HB-Hybrid
Function: Control, Driving
Number of Poles: 2

###

Samples:
US$ 42/Piece
1 Piece(Min.Order)

|
Request Sample

###

Customization:
Available

|


###

Housing Material Metal
Bearing at Output Ball Bearings
Max.Radial Load(10mm from flange) 200N
Max.Shaft Axial Load 100N
Radial Play of Shaft (near to Flange) 0.06mm
Axial Play of Shaft ≤0.3mm
Backlash at No-load 1 stage,2stage1.2°,3stage1.5°

###

Model No. Step Angle Motor Length(L1) Rated Current Resistance Inductance Holding Torque # of Leads Rotor Inertia Mass Max.Gear Ratio
Voltage /Phase /Phase /Phase
Single Shaft ( °) (L)mm V A Ω mH mN.m No. g.cm2 Kg  
42HSC1409 1.8 34 2.93 1.33 2.2 3.5 270 4 30 0.22 1:369
42HSC4409 1.8 40 2.5 1.5 1.65 3.3 380 4 40 0.3 1:369

###

42HSC1409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 65.5 65.5 76.1 76.1 76.1 86.5 86.5 86.5 86.5 96.9 96.9 96.9
Output torque ( mN.m) 902 1259 3062 4155 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 428 428 510 510 510 592 592 592 592 674 674 674
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

###

42HSC4409 Planetary Gearbox Specifications:
Reduction ratio 3.71 5.18 14 19 27 51 71 100 139 189 264 369
Total Height(L1+L2) (mm) 71.5 71.5 82.1 82.1 82.1 92.5 92.5 92.5 92.5 102.9 102.9 102.9
Output torque ( mN.m) 1269 1772 4309 5000 5000 10000 10000 10000 10000 10000 10000 10000
Total Weight(g) 508 508 590 590 590 672 672 672 672 754 754 754
Number of gear trains 1 2 3 4
Reducer Length(L2)   (mm) 31.5 42.1 52.5 62.9
Efficiency 90% 81% 73% 66%

The Basics of a Gear Motor

The basic mechanism behind the gear motor is the principle of conservation of angular momentum. The smaller the gear, the more RPM it covers and the larger the gear, the more torque it produces. The ratio of angular velocity of two gears is called the gear ratio. Moreover, the same principle applies to multiple gears. This means that the direction of rotation of each adjacent gear is always the opposite of the one it is attached to.
Motor

Induction worm gear motor

If you’re looking for an electric motor that can deliver high torque, an Induction worm gear motor might be the right choice. This type of motor utilizes a worm gear attached to the motor to rotate a main gear. Because this type of motor is more efficient than other types of motors, it can be used in applications requiring massive reduction ratios, as it is able to provide more torque at a lower speed.
The worm gear motor is designed with a spiral shaft that is set into splines in another gear. The speed at which the worm gear rotates is dependent on the torque produced by the main gear. Induction worm gear motors are best suited for use in low-voltage applications such as electric cars, renewable energy systems, and industrial equipment. They come with a wide range of power-supply options, including twelve-volt, 24-volt, and 36-volt AC power supplies.
These types of motors can be used in many industrial settings, including elevators, airport equipment, food packaging facilities, and more. They also produce less noise than other types of motors, which makes them a popular choice for manufacturers with limited space. The efficiency of worm gearmotors makes them an excellent choice for applications where noise is an issue. Induction worm gear motors can be compact and extremely high-torque.
While the Induction worm gear motor is most widely used in industrial applications, there are other kinds of gearmotors available. Some types are more efficient than others, and some are more expensive than others. For your application, choosing the correct motor and gearbox combination is crucial to achieving the desired result. You’ll find that the Induction worm gear motor is an excellent choice for many applications. The benefits of an Induction worm gear motor can’t be overstated.
The DC gear motor is an excellent choice for high-end industrial applications. This type of gearmotor is smaller and lighter than a standard AC motor and can deliver up to 200 watts of torque. A gear ratio of three to two can be found in these motors, which makes them ideal for a wide range of applications. A high-quality DC gear motor is a great choice for many industrial applications, as they can be highly efficient and provide a high level of reliability.
Electric gear motors are a versatile and widely used type of electric motor. Nevertheless, there are some applications that don’t benefit from them, such as applications with high shaft speed and low torque. Applications such as fan motors, pump and scanning machines are examples of such high-speed and high-torque demands. The most important consideration when choosing a gearmotor is its efficiency. Choosing the right size will ensure the motor runs efficiently at peak efficiency and will last for years.
Motor

Parallel shaft helical gear motor

The FC series parallel shaft helical gearmotor is a compact, lightweight, and high-performance unit that utilizes a parallel shaft structure. Its compact design is complemented by high transmission efficiency and high carrying capacity. The motor’s material is 20CrMnTi alloy steel. The unit comes with either a flanged input or bolt-on feet for installation. Its low noise and compact design make it an ideal choice for a variety of applications.
The helical gears are usually arranged in two rows of one another. Each row contains one or more rows of teeth. The parallel row has the teeth in a helical pattern, while the helical rows are lined up parallelly. In addition to this, the cross helical gears have a point contact design and do not overlap. They can be either parallel or crossed. The helical gear motors can have any number of helical pairs, each with a different pitch circle diameter.
The benefits of the Parallel Shaft Helical Gearbox include high temperature and pressure handling. It is produced by skilled professionals using cutting-edge technology, and is widely recognized for its high performance. It is available in a range of technical specifications and is custom-made to suit individual requirements. These gearboxes are durable and low-noise and feature high reliability. You can expect to save up to 40% of your energy by using them.
The parallel shaft helical gear motors are designed to reduce the speed of a rotating part. The nodular cast iron housing helps make the unit robust in difficult environments, while the precision-machined gears provide quiet, vibration-free operation. These motors are available in double reduction, triple reduction, and quadruple reduction. The capacity ranges from 0.12 kW to 45 kW. You can choose from a wide variety of capacities, depending on the size of your gearing needs.
The SEW-EURODRIVE parallel shaft helical gearmotor is a convenient solution for space-constrained applications. The machine’s modular design allows for easy mounting and a wide range of ambient temperatures. They are ideal for a variety of mechanical applications, including conveyors, augers, and more. If you want a small footprint, the SEW-EURODRIVE parallel shaft helical gear motor is the best solution for you.
The parallel shaft helical gears are advantageous for both high and low speed applications. Parallel helical gears are also suitable for low speed and low duty applications. A good example of a cross-helix gear is the oil pump of an internal combustion engine. Both types of helical gears are highly reliable and offer vibration-free operation. They are more costly than conventional gear motors, but offer more durability and efficiency.
Motor

Helical gear unit

This helical gear unit is designed to operate under a variety of demanding conditions and can be used in a wide range of applications. Designed for long life and high torque density, this gear unit is available in a variety of torques and gear ratios. Its design and construction make it compatible with a wide range of critical mechanical systems. Common applications include conveyors, material handling, steel mills, and paper mills.
Designed for high-performance applications, the Heidrive helical gear unit provides superior performance and value. Its innovative design allows it to function well under a wide range of operating conditions and is highly resistant to damage. These gear motors can be easily combined with a helical gear unit. Their combined power output is 100 Nm, and they have a high efficiency of up to 90%. For more information about the helical gear motor, contact a Heidrive representative.
A helical gear unit can be classified by its reference section in the standard plane or the turning plane. Its center gap is the same as that of a spur gear, and its number of teeth is the same. In addition to this, the helical gear has a low axial thrust, which is another important characteristic. The helical gear unit is more efficient at transferring torque than a spur gear, and it is quieter, too.
These units are designed to handle large loads. Whether you are using them for conveyors, augers, or for any other application that involves high-speed motion, a helical gear unit will deliver maximum performance. A helical gear unit from Flender can handle 400,000 tasks with a high degree of reliability. Its high efficiency and high resistance to load ensures high plant availability. These gear motors are available in a variety of sizes, from single-speed to multi-speed.
PEC geared motors benefit from decades of design experience and high quality materials. They are robust, quiet, and offer excellent performance. They are available in multiple configurations and are dimensionally interchangeable with other major brands. The gear motors are manufactured as modular kits to minimize inventory. They can be fitted with additional components, such as backstops and fans. This makes it easy to customize your gear motors and save money while reducing costs.
Another type of helical gears is the double helical gear. The double helical gear unit has two helical faces with a gap between them. They are better for enclosed gear systems as they provide greater tooth overlap and smoother performance. Compared to double helical gears, they are smaller and more flexible than the Herringbone type. So, if you’re looking for a gear motor, a helical gear unit may be perfect for you.

China Good Price NEMA 8/NEMA 11/NEMA 17/NEMA 23 Planetary Gear Reducer Geared Stepper Motor     motor armatureChina Good Price NEMA 8/NEMA 11/NEMA 17/NEMA 23 Planetary Gear Reducer Geared Stepper Motor     motor armature
editor by CX 2023-03-30