Warranty: 1 year
Model Variety: 2.2KW/3HP
Type: Asynchronous Motor
Frequency: fifty/60HZ, fifty/60HZ
Section: Three-section
Shield Feature: IP55
AC Voltage: 220
Efficiency: IE1/IE2
Product Title: 220V Single Section fifty/sixty HZ 2.2KW 3HP AC Electric powered Motor
Application: Market Device
Speed: 1400 to 3000rpm
Wire Material: a hundred% Copper
Housing Material: solid iron
Model: Kilomega
Mounting: WIth or not flange
Coloration: Blue, Eco-friendly or Grey
Utilization: Machinery Gear
Packaging Details: packing by a wood box every
Port: HangZhou

Item Specs A few-section electrical motor Adopting the nationwide uniform design,Y3 collection substantial effectiveness 3-section asynchronous motor, are conformity with ICE34-1 and GB/T25290-2571standards,also up to the worldwide advanced amount 90’s as substitute of Y series induction motors, lt possesses advanced features this kind of as new framework,very good look,sllight vibration, 14HS2812 28mm Nema 14 Stepper Motor 35 Motor 35BYGH28 1.2A .15N.m 4-guide for 3D Printer CNC Laser minimal sounds and so forth.

Operating conditions
Ambient temperature:-15℃≤0≤40℃
Altitude:not exceeding 1000m
Rated voltage:380Vor any voltage in between 220-760V
Rated frequency:50Hz、60Hz
Protection dass:IP fifty five
Insulation course:F、H
Cooling method:ICO141
Connection:Star-connection for up to 3kw,delta-relationship for 4kw and previously mentioned.
B3 B5 B35 Specification
Type No.Rated outputVoltagespeedFrequency
YC80b-20.fifty five0.75220V280050/60HZ
YC80c-20.seventy five1220V280050/60HZ
YC90S-40.550.seventy five220V140050/60HZ
YCL90S-four0.seventy five1220V140050/60HZ
Product Specifics Running ConditionsAmbient temperature: -15C≤ θ ≤ 40CAltitude: Altitude ought to be lower than a thousand meters over sea degree.Rated voltage: 380V Rated frequency: 50HzConnection: Star-connection for 3KW or less whilst delta-link for 4KW or a lot more.Duty/Ranking: Steady(S1).Insulation class: F, the temperature rise of the stator winding is examined at 80K(by resistance approach).Protection course: The major entire body of the motor is IP54, but the terminal box reaches IP55.Cooling approach: IC0141.
1Shaft go over15Screw
2 Bolt16Spring washer
3Front endshield17Fan
4Spring washer18Fan cowl screw
5Bearing19B5 flange
9Frame23Wave kind
10Leather washer24Rear endshield
11Terminal board25Bolt
12Jacket26Spring washer
13 Gasket27Fan cowl
14Terminal box lid
Production Method Packing&Application Company profile HangZhou CZPT Worldwide Trade Co., 10kw electrical vehicle package with motor controller lithium battery for sedan, golf cart, sightseeing bus Ltd is specialized in exporting Mining, Crusher Vegetation and lease deal production line.We export total selection of mine crusher equipment and spare elements, which includes crushers, belt conveyor, equipment bins, electronic motors,monitor mesh, conveyor belts and relative components. We apply an opening-up techniques of mutual gain and get for all, ready to work with you to create a much better foreseeable future. F&Q Q1. Are you a manufactuer?Of course, Shaft Collar Stainless Metal Shaft Collar Professional Factory Stainless Metal Planer Shaft we make Rubber conveyor belts and conveyor rollers more than 20 many years.Q2. What is the lead time?10 times for bulk get production.30 days for container get generation. Q3. How to shell out?1. T/T or L/C by means of lender account2. Select Alibaba Trade Assurance ServiceQ4. How can we assure good quality?Usually a pre-creation sample prior to mass productionAlways last Inspection before cargo

What Is a Gear Motor?

A gear motor is an electric motor coupled with a gear train. It uses either DC or AC power to achieve its purpose. The primary benefit of a gear reducer is its ability to multiply torque while maintaining a compact size. The trade-off of this additional torque comes in the form of a reduced output shaft speed and overall efficiency. However, proper gear technology and ratios provide optimum output and speed profiles. This type of motor unlocks the full potential of OEM equipment.

Inertial load

Inertial load on a gear motor is the amount of force a rotating device produces due to its inverse square relationship with its inertia. The greater the inertia, the less torque can be produced by the gear motor. However, if the inertia is too high, it can cause problems with positioning, settling time, and controlling torque and velocity. Gear ratios should be selected for optimal power transfer.
The duration of acceleration and braking time of a gear motor depends on the type of driven load. An inertia load requires longer acceleration time whereas a friction load requires breakaway torque to start the load and maintain it at its desired speed. Too short a time period can cause excessive gear loading and may result in damaged gears. A safe approach is to disconnect the load when power is disconnected to prevent inertia from driving back through the output shaft.
Inertia is a fundamental concept in the design of motors and drive systems. The ratio of mass and inertia of a load to a motor determines how well the motor can control its speed during acceleration or deceleration. The mass moment of inertia, also called rotational inertia, is dependent on the mass, geometry, and center of mass of an object.


There are many applications of gear motors. They provide a powerful yet efficient means of speed and torque control. They can be either AC or DC, and the two most common motor types are the three-phase asynchronous and the permanent magnet synchronous servomotor. The type of motor used for a given application will determine its cost, reliability, and complexity. Gear motors are typically used in applications where high torque is required and space or power constraints are significant.
There are two types of gear motors. Depending on the ratio, each gear has an output shaft and an input shaft. Gear motors use hydraulic pressure to produce torque. The pressure builds on one side of the motor until it generates enough torque to power a rotating load. This type of motors is not recommended for applications where load reversals occur, as the holding torque will diminish with age and shaft vibration. However, it can be used for precision applications.
The market landscape shows the competitive environment of the gear motor industry. This report also highlights key items, income and value creation by region and country. The report also examines the competitive landscape by region, including the United States, China, India, the GCC, South Africa, Brazil, and the rest of the world. It is important to note that the report contains segment-specific information, so that readers can easily understand the market potential of the geared motors market.


The safety factor, or SF, of a gear motor is an important consideration when selecting one for a particular application. It compensates for the stresses placed on the gearing and enables it to run at maximum efficiency. Manufacturers provide tables detailing typical applications, with multiplication factors for duty. A gear motor with a SF of three or more is suitable for difficult applications, while a gearmotor with a SF of one or two is suitable for relatively easy applications.
The global gear motor market is highly fragmented, with numerous small players catering to various end-use industries. The report identifies various industry trends and provides comprehensive information on the market. It outlines historical data and offers valuable insights on the industry. The report also employs several methodologies and approaches to analyze the market. In addition to providing historical data, it includes detailed information by market segment. In-depth analysis of market segments is provided to help identify which technologies will be most suitable for which applications.


A gear motor is an electric motor that is paired with a gear train. They are available in AC or DC power systems. Compared to conventional motors, gear reducers can maximize torque while maintaining compact dimensions. But the trade-off is the reduced output shaft speed and overall efficiency. However, when used correctly, a gear motor can produce optimal output and mechanical fit. To understand how a gear motor works, let’s look at two types: right-angle geared motors and inline geared motors. The first two types are usually used in automation equipment and in agricultural and medical applications. The latter type is designed for rugged applications.
In addition to its efficiency, DC gear motors are space-saving and have low energy consumption. They can be used in a number of applications including money counters and printers. Automatic window machines and curtains, glass curtain walls, and banknote vending machines are some of the other major applications of these motors. They can cost up to 10 horsepower, which is a lot for an industrial machine. However, these are not all-out expensive.
Electric gear motors are versatile and widely used. However, they do not work well in applications requiring high shaft speed and torque. Examples of these include conveyor drives, frozen beverage machines, and medical tools. These applications require high shaft speed, so gear motors are not ideal for these applications. However, if noise and other problems are not a concern, a motor-only solution may be the better choice. This way, you can use a single motor for multiple applications.


Geared motors are among the most common equipment used for drive trains. Proper maintenance can prevent damage and maximize their efficiency. A guide to gear motor maintenance is available from WEG. To prevent further damage, follow these maintenance steps:
Regularly check electrical connections. Check for loose connections and torque them to the recommended values. Also, check the contacts and relays to make sure they are not tangled or damaged. Check the environment around the gear motor to prevent dust from clogging the passageway of electric current. A proper maintenance plan will help you identify problems and extend their life. The manual will also tell you about any problems with the gearmotor. However, this is not enough – it is important to check the condition of the gearbox and its parts.
Conduct visual inspection. The purpose of visual inspection is to note any irregularities that may indicate possible problems with the gear motor. A dirty motor may be an indication of a rough environment and a lot of problems. You can also perform a smell test. If you can smell a burned odor coming from the windings, there may be an overheating problem. Overheating can cause the windings to burn and damage.
Reactive maintenance is the most common method of motor maintenance. In this type of maintenance, you only perform repairs if the motor stops working due to a malfunction. Regular inspection is necessary to avoid unexpected motor failures. By using a logbook to document motor operations, you can determine when it is time to replace the gear motor. In contrast to preventive maintenance, reactive maintenance requires no regular tests or services. However, it is recommended to perform inspections every six months.

China 220V Single Phase 5060 HZ 2.2KW 3HP AC Electric Motor With High Quality And Low Noise     with Hot selling	China 220V Single Phase 5060 HZ 2.2KW 3HP AC Electric Motor With High Quality And Low Noise     with Hot selling
editor by czh2023-02-16